In the most recent month of electricity data, December 2020, Concrete's average rate of 9.77¢/kWh -- a difference of about -24% from the U.S. average of 12.80¢/kWh that month.[1]
Year over year in Concrete (WA), electricity rates increased an estimated 2 percent -- from 9.57¢/kWh (December 2019) to 9.77¢/kWh (December 2020).[1]
In December 2019, the average electricity rate in Concrete (Washington) of 9.57¢/kWh -- a difference of about -25% from the United States average of 12.68¢/kWh that month.[1]
Average electricity rates in Concrete, WA in December 2020 were 9.77¢/kWh -- an estimated 24 percent less than average rates that same month in the nation as a whole. [1]
→ Any electricity rate value listed as 0 (zero) signifies temporarily missing data.
→ ¢/kWh = cents per kilowatthour
Comparison of Concrete electricity rates versus national average rates. [1]
→ Any electricty rate value listed as 0 (zero) signifies temporarily missing data.
The average amount of solar radition in Concrete (measured on a monthly basis) is 43 percent lower than an area of the U.S. (Nevada) with historically high levels of solar radiation.[2]
July is historically the month that will have the highest solar output (AC) values in Concrete -- averaging an estimated 618 kWhac. December typically has the lowest output (131 kWhac).[2]
The average amount of solar radition in Concrete (measured monthly) is 0 percent higher than an area of the U.S. (Washington) with historically low levels of solar radiation.[2]
The average monthly solar radiation level in Concrete, WA is 3.74 kilowatt hours per square meter per day(kWh/m2/day). See the chart below for monthly comparisons.[2]
→ Any solar value listed as 0 (zero) signifies temporarily missing data.
→ kWh/m2/day = kilowatt hours per square meter per day
The average monthly solar system output (AC) in Concrete, WA is 4641 kilowatt hours (AC). See the visualization below for month-by-month averages in Concrete.[2]
→ Any solar value listed as 0 (zero) signifies temporarily missing data.
→ kWhac = kilowatt hours (AC)
In the most recent month of natural gas data, December 2020, Concrete's average rate of 10.57$/Mcf -- a difference of about +9% from the U.S. average of 9.73$/Mcf that month.[3]
On a year-over-year basis in Concrete (WA), natural gas rates increased about 3 percent -- from 10.25$/Mcf (December 2019) to 10.57$/Mcf (December 2020).[3]
In December 2019, the average electricity rate in Concrete (Washington) of 10.25$/Mcf -- a difference of about +10% from the United States average of 9.30$/Mcf that month.[3]
Average natural gas rates in Concrete, WA in December 2020 were 10.57$/Mcf -- an estimated 9 percent more than that month's average U.S. rate of 9.73$/Mcf.[3]
→ Any gas rate value listed as 0 (zero) signifies temporarily missing data.
→ $/Mcf = dollars per thousand cubic feet
Comparison of Concrete natural gas rates versus national average rates.[3]
→ Any gas rate value listed as 0 (zero) signifies temporarily missing data.
Electric companies providing service in or near Concrete, WA.
Sorry, no local electric companies found.
Our search for electric companies located in Concrete produced no matches.
Gas companies that offer service in or near Concrete, WA.
Sorry, no local gas companies were found.
Our search for gas companies located in Concrete produced no matches.
Builders that specialize in solar energy in or near Concrete, WA.
Sorry, no local solar contractors were found.
Our search for solar contractors located in or near Concrete produced no matches.
Concrete (WA) is a town in Skagit County with an estimated population of 705.[4]
Subscribe to get the latest on energy delivered to your inbox, once per week.
For more information on energy in Concrete, WA, or for additional resources regarding Concrete energy, visit the EIA.
