In the most recent month of electricity data, March 2020, Dent's average rate of 12.85¢/kWh -- a difference of about -2% from the U.S. average of 13.08¢/kWh that month.[1]
Year over year in Dent (MN), electricity rates decreased an estimated 0 percent -- from 12.91¢/kWh (March 2019) to 12.85¢/kWh (March 2020).[1]
In March 2019, the average electricity rate in Dent (Minnesota) of 12.91¢/kWh -- a difference of about +0% from the United States average of 12.86¢/kWh that month.[1]
Average electricity rates in Dent, MN in March 2020 were 12.85¢/kWh -- an estimated 2 percent less than average rates that same month in the nation as a whole. [1]
→ Any electricity rate value listed as 0 (zero) signifies temporarily missing data.
→ ¢/kWh = cents per kilowatthour
Comparison of Dent electricity rates versus national average rates. [1]
→ Any electricty rate value listed as 0 (zero) signifies temporarily missing data.
The average amount of solar radition in Dent (measured on a monthly basis) is 30 percent lower than an area of the U.S. (Nevada) with historically high levels of solar radiation.[2]
July is historically the month that will have the highest solar output (AC) values in Dent -- averaging an estimated 609 kWhac. December typically has the lowest output (296 kWhac).[2]
The average amount of solar radition in Dent (measured monthly) is 24 percent higher than an area of the U.S. (Washington) with historically low levels of solar radiation.[2]
The average monthly solar radiation level in Dent, MN is 4.61 kilowatt hours per square meter per day(kWh/m2/day). See the chart below for monthly comparisons.[2]
→ Any solar value listed as 0 (zero) signifies temporarily missing data.
→ kWh/m2/day = kilowatt hours per square meter per day
The average monthly solar system output (AC) in Dent, MN is 5791 kilowatt hours (AC). See the visualization below for month-by-month averages in Dent.[2]
→ Any solar value listed as 0 (zero) signifies temporarily missing data.
→ kWhac = kilowatt hours (AC)
In the most recent month of natural gas data, March 2020, Dent's average rate of 7.01$/Mcf -- a difference of about -29% from the U.S. average of 9.86$/Mcf that month.[3]
On a year-over-year basis in Dent (MN), natural gas rates decreased about 8 percent -- from 7.62$/Mcf (March 2019) to 7.01$/Mcf (March 2020).[3]
In March 2019, the average electricity rate in Dent (Minnesota) of 7.62$/Mcf -- a difference of about -20% from the United States average of 9.49$/Mcf that month.[3]
Average natural gas rates in Dent, MN in March 2020 were 7.01$/Mcf -- an estimated 29 percent less than that month's average U.S. rate of 9.86$/Mcf.[3]
→ Any gas rate value listed as 0 (zero) signifies temporarily missing data.
→ $/Mcf = dollars per thousand cubic feet
Comparison of Dent natural gas rates versus national average rates.[3]
→ Any gas rate value listed as 0 (zero) signifies temporarily missing data.
Electric companies providing service in or near Dent, MN.
Sorry, no local electric companies found.
Our search for electric companies located in Dent produced no matches.
Gas companies that offer service in or near Dent, MN.
Sorry, no local gas companies were found.
Our search for gas companies located in Dent produced no matches.
Builders that specialize in solar energy in or near Dent, MN.
Sorry, no local solar contractors were found.
Our search for solar contractors located in or near Dent produced no matches.
The U.S. DOE will be funding clean energy projects in two dozen American Indian and Alaska Native communities, it announced yesterday.
Read More
The United States is maintaining its role as a leader of wind power production across the globe, the AWEA said in a recent report.
Read More
A recent report from the Minnesota Department of Commerce noted that more than a fifth of all electricity generated in the state in 2015 came from renewable sources.
Read More
Dent (MN) is a city in Otter Tail County with an estimated population of 192.[4]
Subscribe to get the latest on energy delivered to your inbox, once per week.
For more information on energy in Dent, MN, or for additional resources regarding Dent energy, visit the EIA.
